Teflon Glass Cloth Tape

Teflon Glass Cloth Tape by Tenacious Tapes. Adhesive tape comparable to 3M PTFE Glass Cloth Tape 5453, Nitto 973UL-S or Stylus 1615. Order online from exclusive approved supplier Wayout Evacuation Systems.

Colour:  Beige

Roll Size:  6mm to 975mm in 10 Metre Lengths

Adhesive:  Silicon

Description:  P945 is manufactured from fiberglass PTFE cloth with anti-stick releasing surface for heat-sealing equipment.

Application:  For anchoring or bonding motor, transformer, etc. The ideal insulating tape for dielectric sealing and embossing use at high temperature. Ground insulation also offers a wearing resistance. UL recognised flame retardation.

Technical Details:

Surface Preparation:  The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 10ºC and 25ºC.

Storage:  Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.

Note:

The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.