Single Side PET Aluminium Butyl Tape

Single Side PET Aluminium Butyl Tape by Tenacious Tapes. Adhesive tape comparable to Tesa 51483. Order online from exclusive approved supplier Wayout Evacuation Systems.

Colour:  Silver

Roll Size: 6mm to 1200mm in 20 Metre Lengths

Adhesive:  Butyl

Description:  A moisture and waterproofing adhesive tape. It consists of water-tight and high adhesion butyl rubber adhesive and polyester laminated aluminium foil. This adhesive tape performs its characteristic at wide range of temperature. It could be used for moisture prevention and weather resistance application for both backing and adhesive, which are water-tight and airtight materials.

Application:

 Prevention of condensation on Liquid Gas pipes.
 Waterproofing and repairing of roofing materials
 Moisture vapour seals for cool room panel joints
 Moisture vapour barrier in building process to prevent rising damp

Technical Details:

Surface Preparation:  The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.

Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.

Note:  The above figures represent average values. Actual figures can vary. The selection and application of a tape is the responsibility of the buyer. Tape should be stored at room temperature and should not be exposed to sunlight. We reserve the right to make changes without notice to our products and specifications.