Polyethylene Laminated Cloth Tape

Polyethylene Laminated Cloth Tape by Tenacious Tapes. Adhesive tape comparable to Stylus 2010 EVA Double Sided Foam Tape. Order online from exclusive approved supplier Wayout Evacuation Systems.

Colour:  Yellow/Black Diagonal Stripe

Roll Size: 6mm to 1350mm in 25 Metre Lengths

Adhesive:  Rubber Natural

Description:  A high quality polyethylene laminated cloth with a rubber adhesive offering high flexibility and conformability.

Application:

Used to signify the presence of hazards in the industrial and commercial situations. It has an easy-tear cloth and is suitable for use on floors and vertical surfaces. It can be used to delineate safe walkways to separate pedestrians from forklifts and highlight potential hazards such as low headroom and obstructions like posts and bollards.

Technical Details:

Surface Preparation:  The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.

Storage:  Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.

Note:

The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.