Double Sided Filmic Mounting Tape

Double Sided Filmic Mounting Tape by Tenacious Tapes. Adhesive tape comparable to 3M High Performance Double Coated Tape 9087, Tesa 4970, Husky 301, Venus 90 or Stylus 770. Order online from exclusive approved supplier Wayout Evacuation Systems.

Colour:  White

Roll Size:  6mm to 1370mm in 50 Metre Lengths NB Special lengths available upon request

Adhesive:  Acrylic Modified

Description:  A white 38 micron hard PVC film carrier with a high tack high shear, highly cross linked solvent acrylic adhesive. This adhesive gives excellent initial tack and because of its high coat weight of adhesive it is ideal for rough, uneven & textured surfaces. The adhesive has very good temperature, U.V. & plasticiser resistance, and has excellent peel adhesion performance even on low energy surfaces. It also has a high quality 80 gsm Havana kraft paper liner with differential silicone release treatment.

Application:  Affixing furniture trims and mouldings, mirror mounting, bonding rough fabrics and cloths & any other surfaces where a strong bond is needed.

Technical Details:

Surface Preparation:  The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.

Storage:  Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.

Note:  The above figures represent average values. Actual figures can vary. The selection and application of a tape is the responsibility of the buyer. Tape should be stored at room temperature and should not be exposed to sunlight. We reserve the right to make changes without notice to our products and specifications.