Copper Foil – Conductive Adhesive Tape

Copper Foil – Conductive Adhesive Tape by Tenacious Tapes. Adhesive tape comparable to 3M 1245 TAPE. Order online from exclusive approved supplier Wayout Evacuation Systems.

Colour:  Copper

Roll Size:  6mm to 290mm in 33 Metre Lengths

Adhesive:  Acrylic Pure

Description:  A soft 35 micron copper foil coated one side with a electrically conductive acrylic adhesive.

Application:  Shielding of signal cable or flexible flat cable. EMR/RFI shielding repair for shielding signal cable or FFC . Binding the ends of knitted wire mesh of shielding cables. For shield leaking or invading electromagnetic waves.

Technical Details:

Surface Preparation:  The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.

Storage:  Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.

Note:  The above figures represent average values. Actual figures can vary. The selection and application of a tape is the responsibility of the buyer. Tape should be stored at room temperature and should not be exposed to sunlight. We reserve the right to make changes without notice to our products and specifications.