Double Sided Butyl Tape K5931

Colour:  Black

Roll Size:  6mm to 1220mm in 30 Metre Lengths

Adhesive:  Butyl

Description:  A high water-resistant butyl rubber adhesive coated on a polyethylene net to give it dimensional stability with a siliconized kraft paper release liner. The adhesive conforms to rough, textured surfaces and has a wide range of applications for joining, sealing waterproofing and vibration absorption. Butyl adhesives are useful for joining low energy surfaces such as PE.

Application:

 Fixing and sealing of joints for waterproofing in construction & civil eng.
 Joining and sealing of membranes
 Holding and sealing of sisalation in the HEVAC industry
 Mounting of light weight signage to textured surfaces e.g. rendered concrete
 Joining/mounting Corex/Corflute
 Vibration isolation of audio parts

Technical Details:

Surface Preparation:  The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.

Storage:  Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.

Note:

The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.