Powder Coating Masking Tape

Powder Coating Masking by Tenacious Tapes. Adhesive tape comparable to 3M 8902 Powder Coat Masking Tape or Husky 592 – Polyester masking tape. Order online from exclusive approved supplier Wayout Evacuation Systems.

Colour:  Green

Roll Size:  6mm to 1270mm in 66 Metre Lengths

Adhesive:  Silicon

Description:  A single sided tape made of 2mil polyester film with a high performance green silicon adhesive that allows clean removal from powder coated surfaces after bake cycle. Excellent resistance to acid, oil, solvent & staining.

Application:

 Masking medium in powder coating applications
 Other high temperature masking areas

Technical Details:

Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.

Storage:  Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.

Note:  The above figures represent average values. Actual figures can vary. The selection and application of a tape is the responsibility of the buyer. Tape should be stored at room temperature and should not be exposed to sunlight. We reserve the right to make changes without notice to our products and specifications.