Air & Water Tight Housewrap Seaming Tape

Product Description:
A PE Resin Cloth coated with a very high tack permanent acrylic adhesive system.

• High performance & repositionable
• Installed without the use of razor, knives or scissors
• Excellent UV stability, adhesive ageing characteristics and good adhesion to self.
• Water & Vapour Tight

Application:
Air & Watertight Seaming Tape for Vapour Permeable Housewraps (Membranes) overlap & seaming Joints. Where longer term UV exposure is likely (6 months) or where window flashing is required

Technical Details:

Surface Preparation:
The surfaces compatible with OptiSeal OD760 are:

• Most current building surfaces
• Concrete and coatings that contain hydraulic binders, tiles, bricks
• Aluminium, metals, glass, wood (treated), PVC.

It is up to the users to check the compatibility with the surface in terms of adherence, chemical compatibility and staining over the range of the application temperatures. The surfaces must be clean, dry and free of dust. In the case of friable, porous or fragile surface, it is advisable to stabilise them with a liquid primer. For an application between 0°C and +5°C, check beforehand the absence of frost or of condensation on the surface. In case of watertightness, it is advisable to make sure that there is no risk of water retention. Carry out a roll-pressing to avoid inclusion of air bubbles. Match contours of the surface when installing in order to avoid stress likely to peel the product. Recommended application pressure is between 5 g/cm² and 15 g/ cm².