Double-sided Polypropylene
Price Range
From: $3.38 (Inc GST)
Colour: Translucent
Roll Size: Any width over 6mm to 1200mm in rolls of 50 Metres
Adhesive: Rubber Solvent
Description: A double sided tape consisting of an 18 micron PP film coated with an aggressive synthetic rubber formulated to offer high shear and good age resistance. The tape has an Havana coloured siliconized paper release liner.
Related Products
Colour: Translucent
Roll Size: Any width over 6mm to 1200mm in rolls of 50 Metres
Adhesive: Rubber Solvent
Description: A double sided tape consisting of an 18 micron PP film coated with an aggressive synthetic rubber formulated to offer high shear and good age resistance. The tape has an Havana coloured siliconized paper release liner.
Application: This tape is especially suitable as a self-adhesive medium for signs, plates, trims and profiles with smooth surfaces as well as for closed cellular foams (e.g. cellular polyethylene and rubber). Other applications include the adhesion of metals, paper and rigid PVC (where plasticisers are not present).
Technical Details:
| Tape Thickness: | 0.10mm |
| Adhesion Power | FINMAT-TM1 on Stainless Steel one side covered with 50um polyester film: |
| 1 minute: | 21 N/25mm |
| 20 minutes: | 23 N/25mm |
| 24 hours: | 26 N/25mm |
| Shear Strength | FINAT-TM8 on Stainless Steel one side covered with 50 um polyester film: |
| 23°C | 72 hours |
| 70°C | 4 minutes |
| Application Temperature: | 15°C |
| Service Temperature: | -40°C to 70°C |
| Storage Temperature: | 15°C to 25°C |
| Shelf Life: | 12 Months at 20ºC 50% RH |
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note:
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.
Specification: Double-sided Polypropylene
|
||||||
| Dimensions | ||||||
|---|---|---|---|---|---|---|
|
||||||
