PVC Electrical Insulation Tape AT7 Retail

PVC Electrical Insulation Tape by Tenacious Tapes. Adhesive tape comparable to 3M Scotch® Vinyl Electrical Tape 35, Tesa 4050 Plasticised PVC Joining Tape, Nito Vinyl Tape for Electric Insulation No.21 or Stylus 520. Order online from exclusive approved supplier Wayout Evacuation Systems.

Colour:Black, White, Grey, Red, Green, Blue, Yellow, Brown, Orange,Violet, Yellow/Green, Service green, Light thermal grey

Roll Size:  Widths 6mm to 1300mm and 19mm in 20, 33 Metre lengths.

Adhesive:  Rubber Natural

Description: PVC Electrical Insulation tape, flame retardant/self-extinguishing. Offers good conformability.

Application:  Wire and cable insulation, colour coding of electrical cables, loom harnessing, stopping off in plating, prevention of electrolytic corrosion, packaging applications, drum or tube sealing.

Technical Details:

Specification:  Certification to the following standards may be available on request.BS3924 31/90Tp, BS4J10, BS3887 : 1991, IEC 454-3-1 and AS1621.

Surface Preparation:  The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensi-tive adhesive must be applied with the maximum possible pres-sure in order to achieve maximum adhesion levels. The recom-mended application temperature is between 15ºC and 25ºC.

Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.

Note:  The above figures represent average values. Actual figures can vary. The selection and application of a tape is the responsibility of the buyer. Tape should be stored at room temperature and should not be exposed to sunlight. We reserve the right to make changes without notice to our products and specifications.