Embossed Silicon Rubber Release Tape

Embossed Silicon Rubber Release Tape by Tenacious Tapes. Adhesive tape comparable to Tesa Printer’s Friend 4563 PV3 Silicone coated roller wrapping tape with smooth surface, Stylus 2420 or Husky GRIP. Order online from exclusive approved supplier Wayout Evacuation Systems.

Colour:  Grey

Roll Size:  20mm to 410mm in 25 Metre Lengths

Adhesive:  Rubber

Description:  A single sided reinforced grey silicone rubber with a dimpled finish with a high performance rubber adhesive. The tape is supplied on a red MOPP filmic release liner.

Application:  Used on drive and idler rollers on rewind machinery to help provide friction/drive without adherence to surfaces (e.g. for rewind of pressure sensitive materials). In addition the tape will reduce noise and help prevent wrinkles occurring. Also used for the prevention of ink build-up on print machinery.

Technical Details:

Surface Preparation:  The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.

Storage:  Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.

Note:

The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.